The ISCOM S5600G series switches are the new-generation and high- efficiency Layer 2/3 Gigabit Ethernet switches. This series adopt a new- generation switching software platform based on RESP and lexible hardware design, such as ISCOM S5600G-24T4X (24x1GE RJ45 + 4x1/10GE SFP+), ISCOM S5600G-24S4X (24x1GE SFP + 4x1/10GE SFP+), ISCOM S5600G-48T4X (48x1GE RJ45 + 4x1/10GE SFP+), ISCOM S5600G-48S4X (48x1GE SFP + 4x1/10GE SFP+), and ISCOM S5600G-24X2C(24x1/10G SFP+ + 2x40/100GE QSFP28).
The ISCOM S5600G series feature high reliability, high security, easy maintenance, simple management. They adopt advanced OAM protocols, meeting the carrier’s requirements for MEF CE2.0 standards to deliver EPL, EVPL, EP-LAN, EVP-LAN and E-Access services. The ISCOM S5600G series also support state-of-the-art IPv4/IPv6 unicast/multicast protocols and Intelligent Stacking Framework (ISF) technology.
With these features, they can be widely applied to various networking scenarios. For example, they can function as edge devices on the MAN, aggregation switches on a campus or enterprise network, or gigabit access in the Internet/Enterprise Data Center (IDC/EDC).
High capacity, high density
High reliability and protection
• STP, RSTP, MSTP
• LACP
• ITU-T G.8032 with fault switching time less than 50ms (the fault detection can be based on physical interface and CFM CC)
• Dual-system and dual-configuration-file redundancy backup
ISF Stacking
• Up to 4 devices
• Liner connection and ring connection
• Uplink connect
OAM and SLA
• Point-to-point: EEE802.3ah
• End-to-end: hardware IEEE802.1ag to implement 3.3ms CC monitoring
• Rich SLA, ITU-T Y.1731
• MEF CE2.0 certified E-Line, E-LAN, E-TREE and E-Access services
• Hardware BFD
Various security guarantees
• Various AAA mode such as RADIUS and TACACS+
• IEEE 802.1x authentication
• Port secure MAC and limits on the MAC addresses to stop attacks from illegal users
• Various ACL policies to control packet forwarding lexibly
• DHCPv4/v6 Snooping and Option 82/18/37 to avoid DHCP attacks
• DAI and IP Source Guard based on the DHCP binding table to prevent ARP looding attacks and IP attacks
• Broadcast storm and loop detection to ensure the stability of the network
• Lightning protection for the power supply and all the Ethernet electric interfaces and protect hardware investment of the customer Fine tunable QoS
• Rich scheduling policies such as SP, WRR, or SP + WRR, DRR, or SP+DRR
• Dual-bucket three-color CAR based on the traffic and H-CAR
• Statistics based on traffic
IPv6 Ready
• IPv6 ping/telnet/SSH/FTP/SNMP/HTTP
• VRRPv3
• IPv6 routing, IPv6 Path MTU, IPv6 ACL
• IPv6 Source Guard, IPv6 prefix Snooping, ND Snooping
• DHCPv6 Client/Server/Relay/Snooping, RA Snooping and Option18/37 to ensure the network security
• MLD Snooping to ensure the IPv6 multicast monitoring
Advanced management system
• SNMP, RMON, Telnet, SSH, Web management interface to increase the usability of the device
• Support Raisecom Rcview NMS
• Automatic configuration and loading. The administrator can put the configuration file set in advance to the TFTP server for the automatic loading of the switch while it is booting, thus simplifying the management and maintenance
|
P/N |
ISCOM S5600G-24T4X |
ISCOM S5600G-24S4X |
ISCOM S5600G-48T4X |
ISCOM S5600G-48S4X |
ISCOM S5600G-24X2C |
|
Port Number & Type |
24x10/100/1000 RJ45 + 4 x 1G/10G SFP+ |
24x100/1000 SFP + 4 x 1G/10G SFP+ |
8x10/100/1000 RJ45 + 4 x 1G/10G SFP+ |
48x100/1000 SFP + 4 x 1G/10G SFP+ |
24x1/10G SFP+ + 2x40/100GE QSFP28 |
|
Management interface |
SNMP interface (RJ45) console interface: 1 mini-USB Console |
||||
|
Dimension(mm) (L) x (W) x (H) |
1RU, 19" (440 x 360 x 44) |
||||
|
Device Weight (kg) |
4.42kg |
4.50kg |
6.22kg |
6.77kg |
4.52kg |
|
Power Supply |
hot-swappable power supplies: AC/S, DC/S, AC/D, DC/D, AC |
||||
|
Voltage Scope |
AC 220V(100~240V), DC 48V(-36~-72V) |
||||
|
MAX Device Power (W) |
52 |
75 |
58 |
93 |
88 |
|
FAN Noise |
< 60 dBA |
||||
|
Energy saving |
Support 802.3az Ethernet EEE energy-saving Support intelligent Fan speed regulation-based temperature |
||||
|
Working Temperature |
-10-50°C |
||||
|
Relevant Humidity |
5%–90% RH (non-condensing) |
||||
|
Anti-thunder |
cable port anti-thunder CM 6kv power anti-thunder AC: DM 6kv / CM 6kv DC: DM 1kv / DM 2kv |
||||
|
Jumbo Frame |
9600B |
||||
|
Buffer |
4.5MB |
||||
|
Memory (SRAM) |
2GB |
||||
|
Flash |
32MB NOR FLASH + 4GB EMMC FLASH |
||||
|
Switch Capacity (Gbps) |
128 |
128 |
176 |
176 |
448 |
|
Packets Switch Rate (Mpps) |
96 |
96 |
131 |
131 |
334 |
|
L2 |
Support VLAN based on MAC/protocol/IP subnet/interface Support 4K VLANs, QinQ and VLAN mapping(1:1/N:1) Support 12K MAC address MVRP, VTP, super vlan |
||||
|
Multicast |
IGMP snooping, MLD snooping, IGMP MVR, IGMP/MLD filter, IGMP/MLD proxy, PIM DM, PIM SM, PIM SSM |
||||
|
QoS/ACL |
Support rate limiting based on the ingress direction and egress direction of interfaces. Support HCAR Each interface supports 8 queues and priority mapping Support traffic classification and traffic policy Support SP, WRR, DRR, SP+WRR, and SP+DRR queue scheduling modes Support congestion control WRED Support interface/queue shaping |
||||
|
Reliability |
Support manual aggregation and static LACP Support ELPS (ITU-T G.8031), ERPS (ITU-T G.8032) Support STP/RSTP/MSTP and spanning tree protection functions: BPDU Guard, root Guard loop protection, TC protection/suppression Support Loop Detection Protection (LBD) Support Port Backup, Port Isolation Support ISF Stacking |
||||
|
Security |
Support AAA mode such as Tacacs+, radius Support 802.1x authentication, MAC address authentication Support the whitelist, port security MAC, and MAC address limit Support SSHv2.0, SFTP, HTTPS, CPU protection Support IP source guard, support prevention for DOS attack, ARP attack, SYN Flood of TCP attack, UDP Flood attack broadcast storm attack, and large traffic attack |
||||
|
DHCP |
DHCPv4/v6 client/server/snooping/relay DHCPv4 option61/82 DHCPv6 option18/37 |
||||
|
IPv6 |
Support dual stacks Support IPv6 Ping/Tracert/Telnet/ SSH, IPV6 FTP/TFTP/SFTP Support IPV6 RADIUS, IPV6 TACACS+, IPV6 NTP, and SNTP Support ND, IPv6 Path MTU, VRRPv3 Support IPv6 NMS for Raisecom RCView system |
||||
|
IP Routing |
IPv4 and IPv6 static route Support ECMP and policy routing Support RIP, RIPng, OSPFv2/v3, ISISv4/v6, BGPv4/4+ IPv4 multicast route: IGMPv1/v2, PIM-DM/SM/SSMv4 IPv6 multicast route: MLDv1/v2, PIM-DM/SM/SSMv6 |
||||
|
Clock-sync |
NTPv4/v6, PTP-TC |
||||
|
Management and Maintenance |
Support diversified management methods (CLI, SNMPv1/v2c/v3, Web network management, Telnet, and SSHv2.0) Support the Raisecom RCView system. Support local and remote port mirroring, traffic mirroring. Support system logs and hierarchical alarms. Support power Dying Gasp. Support optical module DDM, Virtual Cable Test (VCT) and UDLD. Support IPv4/v6 ZTP Support system and environment monitoring (CPU/Memory/Flash/Temperature/power/fan) |
||||
