The ISCOM S5600-EI series switches are the new-generation and high-efficiency Layer 2/3 Gigabit Ethernet switches. This series adopt a new-generation switching software platform based on Linux OS and flexible hardware design, such as ISCOM S5600-28C-EI (24x1GE RJ45 + 4x1/10GE SFP+), ISCOM S5600-28C-EI-24F (24x1GE SFP + 4x1/10GE SFP+), ISCOM S5600-52C-EI (48x1GE RJ45 + 4x1/10GE SFP+), ISCOM S5600-52C-EI-48F (48x1GE SFP + 4x1/10GE SFP+), and supporting one slot for extension cards on the rear panel. There are 4 different extension cards to choose from, 8x10GE SFP+, 8x1GE SFP, 8x1GE RJ45 and 2x40GE QSFP+ ports.
The ISCOM S5600-EI series feature high reliability, high security, easy maintenance, simple management. They adopt advanced OAM protocols, meeting the carrier’s requirements for MEF CE2.0 standards to deliver EPL, EVPL, EP-LAN, EVP-LAN and E-Access services. The ISCOM S5600-EI series also support state-of-the-art IPv4/IPv6 unicast/multicast protocols and Intelligent Stacking Framework (ISF) technology.
With these features, they can be widely applied to various networking scenarios. For example, they can function as edge devices on the MAN, aggregation switches on a campus or enterprise network, or gigabit access in the Internet/Enterprise Data Center (IDC/EDC).
• High capacity, high density
• High reliability and protection
☉STP, RSTP, MSTP
☉LACP
☉ITU-T G.8032 with fault switching time less than 50ms (the fault detection can be based on physical interface and CFM CC)
☉Dual-system and dual-configuration-file redundancy backup
• ISF Stacking (not compatible with L3 features)
☉Up to 2 devices
☉Liner connection of ring connection
☉Uplink connect
• OAM and SLA
☉Point-to-point: EEE802.3ah
☉End-to-end: hardware IEEE802.1ag to implement 3.3ms CC monitoring
☉Rich SLA, ITU-T Y.1731
☉MEF CE2.0 certified E-Line, E-LAN, E-TREE and E-Access services
☉Hardware BFD
• Various security guarantees
☉Various AAA mode such as RADIUS and TACACS+
☉IEEE 802.1x authentication
☉Port secure MAC and limits on the MAC addresses to stop attacks from illegal users
☉Various ACL policies to control packet forwarding flexibly
☉DHCPv4/v6 Snooping and Option 82/18/37 to avoid DHCP attacks
☉DAI and IP Source Guard based on the DHCP binding table to prevent ARP flooding attacks and IP attacks
☉Broadcast storm and loop detection to ensure the stability of the network
☉Lightning protection for the power supply and all the Ethernet electric interfaces and protect hardware investment of the customer
• Fine tunable QoS
☉Rich scheduling policies such as SP, WRR, or SP + WRR, DRR, or SP+DRR
☉Dual-bucket three-color CAR based on the traffic and H-CAR
☉Statistics based on traffic
• IPv6 Ready
☉IPv6 management
☉IPv6 ACL
☉DHCPv6 Snooping, RA Snooping and Option18/37 to ensure the network security
☉MLD Snooping to ensure the IPv6 multicast monitoring
• Advanced management system
☉SNMP, RMON, Telnet, SSH management interface to increase the usability of the device
☉Automatic configuration and loading. The administrator can put the configuration file set in advance to the TFTP server for the automatic loading of the switch while it is booting, thus simplifying the management and maintenance
|
Model |
ISCOM S5600-28C-EI |
ISCOM S5600-28C-EI-24F |
ISCOM S5600-52C-EI |
ISCOM S5600-52C-EI-48F |
|
Port Number & Type |
24x10/100/1000M RJ45 |
24x100/1000M SFP |
48x10/100/1000M RJ45 |
48x100/1000M SFP |
|
Extension Card |
One slot for the extension card: |
|||
|
Management interface |
1 SNMP interface (RJ45) |
|||
|
Dimension(mm) |
1U, 19" (444 x 420 x 44.4) |
|||
|
Device Weight (kg) |
5.4kg (no PSU) |
5.3kg (no PSU) |
5.6kg (no PSU) |
5.5kg (no PSU) |
|
Power Supplies Weight(kg) |
0.8kg for each PSU |
|||
|
Power Supplies |
hot-swappable dual power supplies: dual AC /dual DC/AC+DC |
|||
|
Voltage Scope |
AC 220V(100~240V), DC 48V(-36~-72V) |
|||
|
MAX Device Power |
39/43 |
59/63 |
51/56 |
86/90 |
|
MAX Card Power (W) |
2x40GE QSFP+ card: 14W |
|||
|
FAN Noise |
< 60 dBA |
|||
|
Working Temperature |
0-50°C |
|||
|
Relevant Humidity |
10%–90% RH (non-condensing) |
|||
|
Anti-thunder |
cable port anti-thunder CM 6kv |
|||
|
Jumbo Frame |
10KB |
|||
|
Buffer |
4MB |
|||
|
Memory (SRAM) |
1GB |
|||
|
Flash |
1GB |
|||
|
Switch Capacity (Gbps) |
128 |
176 |
||
|
Packets Switch Rate (Mpps) |
95 |
131 |
||
